|
||
|
||
|
||
 |
Guestbook 2001
This site really helped me in
understanding PLC,and it helped me during my internship in an Automation Company.
Haider Ali Lahore, Pakistan - Monday, December 31, 2001 at 05:47:11 (EST) What a brilliant web-site!
You've bailed me out on completing a college assignment, and increased my knowledge ten-fold.
Keep up the excelent work
Barney Blackshaw <barneyblackshaw@connectfree.co.uk> Worcester, UK - Sunday, December 30, 2001 at 10:35:44 (EST) I am working on PLC project for last 5 years. But I always found difficult to answer question "What is PLC?"
Here you get correct and appropriate answer for it and also good information for person working with PLC.
Nitin Dharmadhikari <nikitadharmadhikari@yahoo.com> Pune, MS India - Wednesday, December 26, 2001 at 04:24:55 (EST) Im going to College for plc programming and after reading this site I feel I have a pretty good understanding of how plcs work. This web site is awesome and i`ll be recommending it to everyone I know.
THANK YOU.
MIKE <kingolfer_2000@yahoo.com> Orangeville, on Canada - Tuesday, December 25, 2001 at 22:07:47 (EST) thanks God , and thanks to the author and all whoes contribute and share their knowledge and experience
soe lwin <vimsoelwin@yahoo.com> Subang Jaya,, Selangor Malaysia - Monday, December 17, 2001 at 01:14:55 (EST) I've always installed plc systems when overhauling a piece of equipment, but have never been involved in the programing . I tried to study the Omron manuals, but I'm no phd...Your site has made it crystal clear to me, and I just ordered the book. I can honestly sit in front of CX-Programmer now and confidently write a simple program that I know will work. That to me is very rewarding! Thanks a million.
T.K. <kc_151@hotmail.com> Montreal, Qc. Canada - Thursday, December 13, 2001 at 21:45:34 (EST) On the jobs page, could you show which country each engineer or company is advertising from. I'm looking for engineers in the UK & I'm finding it hard to tell if there are any on your pages.
Nik Peters <CautomationS@aol.com> Wolverhampton, UK - Friday, December 07, 2001 at 18:13:22 (EST) Thank for all of you there, your site really help me a lot, Thanks again
Amir Hadzibeganovic <amir_hadzibeganovic@hotmail.com> Tuzla, Bosna and Hercegovina Europa - Thursday, December 06, 2001 at 01:16:08 (EST) Congratulations and many thanks. this is very imporatant site for me and all.by the teaching way, i think it is the best way to do that as basic but for more experinance i thank we will need more! first let us start from here and then we will see. with my best regards
gamal
gamal abd el-basit mahmoud <gbasit@mantrac.com.eg> luxor, hurghada Egypt - Wednesday, December 05, 2001 at 09:32:51 (EST) Great site very useful information for the beginner, i wire them up but did not know too much about the programming, your site has given me the information to learn this, well done....
John Clark <john@clark62.fsnet.co.uk> U.K. - Sunday, December 02, 2001 at 05:22:24 (EST) This site is very useful for getting information from PLC programming. On line Q&A is very useful to clear doubts and anybody can get exat information what he / she needs. Above all a wonderful site at last.
P.M. Barik <barikpm@hotmail.com> Kolkata, WB INDIA - Wednesday, November 28, 2001 at 23:31:24 (EST) Thank for all of you there, your site really help me a lot, Thanks again, i reslly hsvr yo
Bhong <vinsaint@www.com> Iligan City, Philippines - Sunday, November 25, 2001 at 10:57:13 (EST) good
mas joko <http://www.trusty-discount.com> fistex - Wednesday, November 21, 2001 at 22:36:54 (EST) wow
best site !
i just thanks for webmaster
and keep great!
didi kempot USA - Wednesday, November 21, 2001 at 22:33:47 (EST) At last, a site which caters for the "beginner"...and an excellent site it is too! Very informative with great animations. I've nearly always been involved in PLC controls but need to "brush up" a little and it was a great help. THANKS A LOT!!
David Robson <david.p.robson@btinternet.com> Newcastle u Tyne, UK - Sunday, November 18, 2001 at 10:14:04 (EST) i`m 58 selfemloyed and now find myself faced with plc tech. i find this site very informative but would like to know much more about A B plc. i`m having to ad functions to a customers plant and would like to know what software i require to accses the olc any comments or info will be greatly appreciated. bill
bill de beer <bdb@xsinet.co.za> waterfall, kzn South Africa - Thursday, November 15, 2001 at 13:27:49 (EST) Hi! I write PLC programs for a living, and had to learn it the "hard" way. I have several engineers in my department who are trying to learn about PLC's, and this site is definitely going to help doing that. Great!
Frans Geurts van Kessel <fransgvk@iae.nl> Deurne, Netherlands - Tuesday, November 13, 2001 at 16:05:24 (EST) Wonderful site to understand PLC's.Thanks so much.
S.Pandi Durai <spdurai@hotmail.com> Dubai, UAE - Monday, November 12, 2001 at 07:36:48 (EST) Even though the guest book is
filled up, thought I'd squeeze
in one more. I had been
working on the GUI interface
for a fairly large project
with PLC controls that was not
anywhere close to my
responsibilities. However, out
of curiosity I have read your
tutorial twice over and at
least have been exposed to
what PLCs are all about.
Thanks for your good work.
fsm <fred@selcorp.co.jp> Japan - Tuesday, November 06, 2001 at 22:16:26 (EST) Is a great website
Carlos Carrillo Bautista <ingcabaci@hotmail.com> Agua Dulce, Veracruz Mexico - Tuesday, November 06, 2001 at 15:58:11 (EST) Muy buen sitio para conocer algo más acerca de los PLC´s, estaría bien pensar en una versión en Español
javier Vázquez <cartonvaz@teleline.es> valladolid, Spain - Tuesday, November 06, 2001 at 11:55:20 (EST) Very helpful. Am in Germany and needed research
material for project back home. Makes loads of sense, will be very helpful and have just used the quota of paper printing it all out!! Didn't take much searching to find a brilliant site that I will be recommending. Well done!
liz hall leamington spa, Uk - Tuesday, November 06, 2001 at 03:55:13 (EST) Very helpful. Am in Germany and needed research
material for project back home. Makes loads of sense, will be very helpful and have just used the quota of paper printing it all out!! Didn't take much searching to find a brilliant site that I will be reccommending. Well done!
liz hall leamington spa, Uk - Tuesday, November 06, 2001 at 03:54:42 (EST) Gracias por su sitio, Esta muy
interesante y organizado.Sera muy util que pongan la version en Español.
Ovel Fajardo <ovelfajard@yahoo.com.mx> San Pedro Sula, Honduras - Monday, November 05, 2001 at 20:43:00 (EST) Very useful and good organized site, thanks.
Gregory Remeslennik <gremes@bioreg.com> Beltsville, MD USA - Monday, November 05, 2001 at 14:57:04 (EST) great and cool site
rick <rick@eth.net> cranford, nj USA - Friday, November 02, 2001 at 16:00:32 (EST) Excellent PLC tutorial and thank you for putting it on the web for free !
Arnold Ruymgaart <aruymgaart@hotmail.com> Austin, TX USA - Friday, November 02, 2001 at 12:59:59 (EST) It is preety useful to those who cannot refer through the books and and those who do netsurfing regularly help to get new messages like this.
Welldon and Keep it up.
Nivedha <prabha76@hotmail.com> chennai , TN India - Friday, November 02, 2001 at 04:23:30 (EST) cool and interesting webiste!!
Insurance Malaysia Malaysia - Thursday, November 01, 2001 at 11:24:43 (EST) One more thing, I like the design! Easy to navigate, don't change a thing!
dedicated servers
Me again USA - Thursday, November 01, 2001 at 04:10:17 (EST) This site is the most straightforward and understandable I've seen on PLC's. You make programming logic controllers seem like child's play! Well.... as close as possible.
dedicated servers - Thursday, November 01, 2001 at 04:08:39 (EST) As a former support engineer on both the 584 and 884 PCs (based in Andover, MA), I have used PLC concepts in work on Trident subs (where KISS is the byword), as well as biomedical device metrology. Everyone should be familiar with this design paradigm!
Eric McIntyre <ericmcin4@hotmail.com> Atlanta, GA USA - Wednesday, October 31, 2001 at 04:58:10 (EST) It is lucky to get this site from internet, I like it.thank u very much.
vaithi <vaithi75@yahoo.com> chennai, tamilnadu india - Tuesday, October 30, 2001 at 13:03:41 (EST) After not working with PLC's for almost ten years I found myself applying for a position requiring PLC programming skills. Your website has been a tremendous help in refreshing and improving my skills. Thanks so very much!
John Baker <jd.baker@att.net> Akron, OH USA - Saturday, October 27, 2001 at 14:02:30 (EDT) Really enjoy your website. Thank You.
animeanipikecatsilovecatsdogspetfinder
Linda Myers USA - Friday, October 26, 2001 at 04:32:49 (EDT) It's a very good site. Good job! Tank You.
Claudio Venturini <claudiov@ifxbrasil.com.br> S. B. Campo, SP Brasil - Tuesday, October 23, 2001 at 09:43:41 (EDT) Add your comments here
Claudio Venturini <claudiov@ifxbrasil.com.br> S.B. Campo, SP Brazil - Tuesday, October 23, 2001 at 09:36:19 (EDT) Glad to find this excellent PLC tutor web site.
Gary Li <garyli@sympatico.ca> Toronto, ON Canada - Monday, October 22, 2001 at 20:26:56 (EDT) thank you very much for build this web. it really good for me who have no one to ask about PLC programs. you give me an acknowledge that useful.
keep walking.
nuch <t_nuch@hotmail.com> bangkok, thailand - Monday, October 22, 2001 at 08:21:29 (EDT) This site will surely helps for those beginners in PLC. Thanks to PLC.net for the information their given to us.
Leonardo A. Perez Jr. <Leonardo@altuwairqui.com> Manila, Philippines - Saturday, October 20, 2001 at 00:02:34 (EDT) Excellent site. Thanks ~Silvia Brown
britney spears pictures Silvia Brown USA - Friday, October 19, 2001 at 19:55:29 (EDT) Great Website, Certainly an excellent approach to teaching plcs without tying one's self to any particular manufacture. The animations are first class.
Francis Omani <fkomani@hotmail.com> Accra, GHANA - Tuesday, October 16, 2001 at 19:29:46 (EDT) It's been great fun going over all the Abcs and infos about plc. Actually it's a very good site for beginners of plc programmers. Thank you for your help
oliver <oliverlfs@sina.com> China - Monday, October 15, 2001 at 10:24:51 (EDT) For someone just learning PLCs, this site was very useful and educating, It has given me the basic foundation for understanding PLCs and has answered the many questions that I had about them.
Darren Langlands <dagwood20_00@hotmail.com> Barrie, ON Canada - Thursday, October 11, 2001 at 16:04:23 (EDT) you have awonderful site for learning plcs.thank you very much.
mohammad <mohsobuh@yahoo.com> aqaba, aqaba jordan - Monday, October 08, 2001 at 04:06:19 (EDT) This site is great!
Mirta Caraballo-Marín <riot72@hotmail.com> Yauco, PR - Sunday, October 07, 2001 at 15:57:19 (EDT) You have a great, informative site. However, the last time I checked, 11111111 in binary translated to 255 not 257 as it says on page 23 of your tutorial. Very nice and informative site. Very well thought out.
Kevin Lively <pharaoh_k@hotmail.com> Kingsland, GA USA - Wednesday, October 03, 2001 at 17:50:44 (EDT) This is a great site for learning PLCs.Thanx to the authors and others.Keep up the good work guys.
Vijay <jvijayv@hotmail.com> Chennai, TN India - Monday, October 01, 2001 at 12:51:39 (EDT) 01100011 ....
This is a site i'm search for
a long time
! bad english i known
I programming in S7-200
Andreas Vogt <andreas__Vogt@t-online.de> Porta Westfalica, Germany - Sunday, September 30, 2001 at 13:02:25 (EDT) nice to see a solo site for PLC'S.yet i am not been able to download free tutorial
zaheer abbas khan <engrzak2001@hotmail.com> ISLAMABAD , PAKISTAN - Thursday, September 27, 2001 at 03:06:01 (EDT) Thank you for info. on
RS232 plugs. I am used to only 9 pin but, recently
came across a 25 pin.
Your site helped me wire
up a 25 to 9 lead.
Eddie weymouth, dorset England - Sunday, September 23, 2001 at 05:52:58 (EDT) muy bueno, espero que continuen mejorando
jose zamorano <jzamorano@lucchetti.com.pe> lima, 09 peru - Saturday, September 22, 2001 at 21:44:39 (EDT) Its a great compilation of all PLC related stuff. Instead of poking minds in manuals I hav found great underatanding th' this link
Graeat work Keep it up Phil
Anky....
Ankush Sikka <ankushsikka@hotmail.com> Chandigarh, - India - Thursday, September 20, 2001 at 02:08:55 (EDT) It is a very interesting tutorial i have ever seen. But it should be frequently updated
vaithee <psvaithee@yahoo.com> TN, India - Saturday, September 15, 2001 at 06:47:56 (EDT) It is lucky to get this site from internet, I like it.
chaosen <chaosen@hotmail.com> Longyan, On Canada - Thursday, September 13, 2001 at 21:07:24 (EDT) It is a great site. I love it.
tide <tide@tide.com> toronto, On. Canada - Thursday, September 13, 2001 at 21:04:50 (EDT) very informative site written in simple and interesting manner
rajesh kumar <howzzt@rediffmail.com> bombay, india - Thursday, September 13, 2001 at 06:25:59 (EDT) it is really to great, i was wondering if you could add more photo to show who is the the connection is done
nafeth <nafeth_a@hotmail.com> Khanyouins, gaza palestine - Wednesday, September 12, 2001 at 15:09:02 (EDT) Plain English is great site!
Jewelry Store USA - Monday, September 10, 2001 at 17:27:23 (EDT) Hope i will enjoy with this site. It's my first access of this site
Suvas Chandra Batola <hfi.pokhara@bb.com.np> Pokhara, Nepal - Sunday, September 09, 2001 at 01:13:05 (EDT) Add your comments here
colin <ejpcolin@hotmail.com> vancouver, BC canada - Saturday, September 01, 2001 at 20:43:29 (EDT) Cool site. Thanks
Art Bell USA - Monday, August 27, 2001 at 17:50:27 (EDT) I said I'd be back ....
Mr Godden <keith-g@keyence.co.jp> Osaka, Japan - Monday, August 27, 2001 at 04:15:48 (EDT) A complete & very usefull site to understand & master the plc from ground level.
Keep it up Phip Moore!!
MANDAR BAGUL <mandarb@tatahoneywell.co.in> pune, maharashtra India - Monday, August 27, 2001 at 03:34:23 (EDT) Add your comments here
M.Jeyakumar <JEYA_1232@YAHOO.COM> CHENNAI, T.N IN - Thursday, August 23, 2001 at 06:00:01 (EDT) This sites really help me lots in adding information and understanding more on about plc. Thanks.... I really appreciate it. Well guys... keep it on the good works....
Thanks again
norezah mohamad daud <dchomel@yahoo.com> Kuala Lumpur, Malaysia - Thursday, August 23, 2001 at 05:32:31 (EDT) Do you have your own standard banner size, ie. 468x60?
I'm an administrator of Control and Instrumentation Engineering, Mahanakorn University of Technology. I would like to add your link to my department homepage.
KoRn <korn88@hotmail.com> Bangkok Thailand - Thursday, August 23, 2001 at 00:42:14 (EDT) I enjoyed your site! Thank You! Some of my other favorite sites are:
DragonBallZ Pictures Bikini Pictures Ronnie Davis NY, NY USA - Wednesday, August 22, 2001 at 17:42:52 (EDT) I just found your site and it is wonderful. It always nice to find someone who shares one of my interests.
Mathos Matson <mmatson@veritas.com> USA - Monday, August 20, 2001 at 18:27:49 (EDT) GREAT SITE,THANKS.
Nicky O Donnell <nickaus1@yahoo.com> Cork, n/a Ireland - Wednesday, August 15, 2001 at 21:10:11 (EDT) Nice site...
backgrounds <pectjmr@pulp-fiction.com> USA - Wednesday, August 15, 2001 at 17:22:43 (EDT) Add your comments here
Thanks, it is realy a valuable and technical site.
Zia Malik <ziamalik_2k@yahoo.com> ISLAMABAD, Pakistan - Wednesday, August 15, 2001 at 01:05:32 (EDT) ONE OF THE BEST SITES , BUT I HOPE YOUR TEAM TO EXPAND THE SEARCH BOX TO MATCH WIITH AT LEAST MOST KNOWN BRANDS
gamal salah <gamalsk@yahoo.com> CAIRO, EGYPT - Tuesday, August 14, 2001 at 10:13:57 (EDT) I think this is a great site... i got all the help i required as a beginner.
Thanks a lot, keep up the great work
saket
Saket <saket@mailandnews.com> Pune, India - Monday, August 13, 2001 at 13:38:34 (EDT) Hello.
Nicky O Donnell <nickaus1@yahoo.com> Cork, n/a Ireland - Sunday, August 12, 2001 at 13:01:51 (EDT) Really enjoyed the website. Thank You!
FREE STUFF Kansas City Missouri USA - Saturday, August 11, 2001 at 17:32:38 (EDT) An interesting and informative
site.Hard to find!great work.
Bill Wilson <wombatbill@yahoo.com> Sydney, NSW Australia - Friday, August 10, 2001 at 16:58:05 (EDT) A fine attempt to have a knowledge base but it seems all who come in here have little or no knowledge. An attempt should be taken to add features to the site, like examples, the staright talk about the "no-name" brand of PLC's and not to use them because you are just setting your self up for pain in the end when you have to pull off the no name brand an put on an AB, or OMRON, or Siemens, etc. Big names with big tech support for all your questions. Again this site should expand if it wants to be the "SOURCE" and not just here to sell a book. I could tell you a lot about PLC programming, but until you have to program a machine to actually run production, you ain't seen nothing yet.
Basically I wouldn't recommend this site because if you have ever programmed a PLC you would find this site boring and misleading.
A word of advice- email in programs so all can see and learn at the same time. PLC programming is not taught its developed based on each persons personality and past programming experiences. I have spent much time developing Standard PLC programs that I can use on any application and share these to all I meet, to better the programmers I work with. Its all about working smarter not harder
jim USA - Thursday, August 09, 2001 at 13:23:08 (EDT) Congratulations, for this site.
Thank you
Francisco Meza Ojeda <fco_mezao@hotmail.com> San Luis Rio Col., Sonora Mexico - Wednesday, August 08, 2001 at 10:02:53 (EDT) Its one of the best site I have seen that teaches us from the basics to the advanced stage. I am a graduate student and this site has helped me a lot. Thanks for the unbiased info given to us
Atul Kumar Nanchahal <leoatul@yahoo.com> Bryan, TX USA - Tuesday, August 07, 2001 at 00:29:05 (EDT) Thanks for this site, you have very usefull information.
Eric Bogantes <ebogantes@cnfl.go.cr> San Jose, SJ Costa Rica - Friday, August 03, 2001 at 20:37:18 (EDT) Nice Site. Thank You!
Rhonda USA - Tuesday, July 31, 2001 at 20:37:26 (EDT) Wow excellent site. All should make use of it.
PANDIAN.S <pandian-s@eth.net> chennai, tamilnadu india - Tuesday, July 31, 2001 at 13:52:22 (EDT) Very good site for beginers and it was a real help for my first steps through the PLC. I look forward to a section for intermediate level in PLC.
Few days ago I got a message about PLC programing but accidentally it was deleted and PLEASE can anyone send it to me again.
Dorin Anisie <anisied@mail.dntis.ro> ROMANIA - Sunday, July 29, 2001 at 07:53:08 (EDT) Excellent site for beginning knowledge of PLC's. How about being able to download the information as a manual and/or program. Would also like to see an advanced PLC Tutor site with cabalities of downloding basic and advanced ladder logic program examples.
I will definitly pass the site on to my friends.
James G. Shacklock <shackshome@aol.com> Millville, NJ USA - Saturday, July 28, 2001 at 18:09:05 (EDT) A very nice site for people enjoy to learn about PLC's. Thank's to be here and for you're help.
Frank Rivera <riverafg@yahoo.com> Jayuya, PR USA - Friday, July 27, 2001 at 21:23:32 (EDT) A great site for people that enjoy learn about PLC's. thanks to be here to help us.
Frank Rivera <riverafg@yahoo.com> Jayuya, PR USA - Friday, July 27, 2001 at 13:00:54 (EDT) Fantastic I wish I knew about this months ago.
G J Sheppard <sheppardodin@aol.com> Grantham, England - Thursday, July 26, 2001 at 17:40:08 (EDT) Hi Phil,
A terrific source of basic information. Why couldn't the manufacturers do this? I spent several weeks doing the course at a local university, but your site was much more informative than the course.
The only thing it could suggest adding, is some details of DIY PC to PLC interfaces to enable programming via the PC, and perhaps a source for the software.
The only thing I would add, is I that
Harry Bloomfield <harry_m1byt@ntlworld.com> Leeds, West Yorkshire GB - Tuesday, July 24, 2001 at 10:27:39 (EDT) Is a great place for people who are beginner in PLC design
i enjoyed reading
Milton Batres <milton_batres@hotmail.com> chihuahua,chih., Mexico - Thursday, July 19, 2001 at 20:02:50 (EDT) I have some experience with plc AB,GE,Modicom and Siemens and found this site is very attractive.
Ronaldo Perazzo <rperazzo@uol.com.ar> Campana, BsAs Argentina - Thursday, July 12, 2001 at 14:45:57 (EDT) Just excellent! Thank you for helping people who needs clear,wide usefull and concise information
David Contreras <davidfis@hotmail.com> Guuadalajara, JAL México - Saturday, July 07, 2001 at 12:38:15 (EDT) Nice work Phil. Just stumbled over this site and will be sure to return!
Keith Godden <keithg1uk@yahoo.co.uk> USA - Thursday, July 05, 2001 at 03:20:22 (EDT) Can you please review you animation on the one shot logic. I think it will confuse beginners because in rung 2 after the one shot goes true the second time you show NO 1001 & NC 1001 both being false. In actuality The NO 1001 in rung 2 should be true from the previous scan.
Please check & verify and let me know if I am wrong.....
Sam <fak17@hotmail.com> Columbia, SC USA - Wednesday, July 04, 2001 at 22:57:13 (EDT) What a GREAT Site! I'll be visiting her instead of ebay.
Thanks
Chris Cook <cccook@evansville.net> Evansville, IN USA - Friday, June 29, 2001 at 00:25:14 (EDT) What a GREAT Site! I'll be visting her instead of ebay.
Thanks
Chris Cook <cccook@evansville.net> Evansville, IN USA - Friday, June 29, 2001 at 00:24:56 (EDT) Great Site, very interesting and users friendly
Jess Asuncion <jea319@yahoo.com> San Pedro, Philippines - Monday, June 25, 2001 at 19:03:45 (EDT) I am a plant instrument technician leader on board the 132 MW steam power plant and at present time we are still using a dynosaur control systems. I find this site very useful and helpful
in learning about PLC's.
Robert S. Usi <instech2@yahoo.com> Tamuning, GU Guam - Tuesday, June 19, 2001 at 05:45:34 (EDT) I,m very glad, I found this perfect site,and I was looking to refresh my memory about plc . and I found.
thank you very much.
And I look for siminar about new knowledge plc
hussein younes <hassanlb@netscape.net> guelph, ont canada - Monday, June 18, 2001 at 11:05:54 (EDT) Interesting site, With my new found interest in PLC's this is a great starting point.
Dennie L. Chambliss <hidaddy1077@aol.com> Huber Hts, Oh USA - Monday, June 18, 2001 at 09:16:17 (EDT) It´s a very good site for beginners like me. I will like to have all this info in Spanish.
Cornelia A. McDonald <corneliam@hotmail.com> Panama, Panama - Sunday, June 17, 2001 at 13:21:28 (EDT) Thankful to you.A really great tutorial for a begginer like me..Thanks again
Bi
Lomesh Dutta <dutta@softhome.net> India - Friday, June 08, 2001 at 06:12:40 (EDT) This was a very imformational site to a beginner like myself.
Bevan Cox <coxbevan@hotmail.com> Vernal, UT USA - Tuesday, June 05, 2001 at 10:42:59 (EDT) There should be more sites like this to link skilled trades workers with employment and training.
Keep it up!
BFITT - Building a Foundation in The Trades <bfitt@mtectraining.com> Mississauga, ON Canada - Wednesday, May 30, 2001 at 13:29:03 (EDT) The best PLC's site i ever discovered! I was looking one evening to learn something about PLC, and then I found this page - Hurraaaa!
Please keep on the good works. The informations was exactly what I needed!
Peter <oldchris@qualcon.dk> Denmark - Monday, May 28, 2001 at 06:32:57 (EDT) This site is very much useful to learn about the PLCs . We will become billgates in this field we did read this site. Thats it.
Thanks to the WEB and thanks to the INTERNET
ravindra mullapudi <nat-l-qh@hn.vnn.vn> Hyderabad, Hanoi, USA - Sunday, May 27, 2001 at 02:49:33 (EDT)
Hai this site is very good especially for Instrumentation Engineer like me. I have recommended this site to all my friends and teachers.
esakkirajan <esakkirajan@rediffmail.com> Chennai, TamilNadu INDIA - Friday, May 25, 2001 at 11:23:02 (EDT)
I am a mechanical engineering student with no prior knowledge of PLC's. At work today, one of our machines burned out a solenoid control. Our chief electrician was patient enough to explain what happened in the PLC, but admittedly, I was lost. Your site helped me decipher the technical lingo. Thanx!
Eli Hughes <ehughes@uwm.edu> Milwaukee, WI USA - Thursday, May 24, 2001 at 18:11:15 (EDT) This site is just what I was looking for. I didn't know anything about PLC's and then I found plcs.net. In just one hour I feel I have learned enough to start the programming of my A-B Micrologix controller. Thanks and keep up the good work.
Mark Chaplin <mark@vcdr.com> Langley, BC Canada - Friday, May 18, 2001 at 03:38:03 (EDT) Extremely Helpful site. I learned so much. Thanks
Jamie Brown Pictou, NS Canada - Thursday, May 17, 2001 at 10:32:19 (EDT) Nice PLC Tutorial SIte, but.. is there anyone who has the PDF format of this kind of tutorial? Please help me....
show me the site or please send me those pdf
Mehan <gi_mehan@yahoo.com> Makassar, Indonesia - Wednesday, May 16, 2001 at 00:24:27 (EDT) i,m studen of school tecnic, can anyone give my something about plc book,s or soft ware, thank to you
zenna <windcyber@lovemail> semarang, indonesia - Saturday, May 12, 2001 at 10:10:37 (EDT) i,m studen of school tecnic, can anyone give my something about plc book,s or soft ware, thank to you
zenna <windcyber@lovemail> semarang, indonesia - Saturday, May 12, 2001 at 10:10:36 (EDT) Just found your PLC Tutor site today, looking through it and its pretty cool. I like the animations, now I can see what is happening and I don't have to search the back of a book for definitions, the animations make it all click in my mind. I see!!!!
Keep up the good work. I ordered the book, looking forward to learning more so I can apply it to my job and get better job opportunities. I can read fast, but its the understanding that I need help on and the visual examples make it a reality.
Thanks Phil
Todd
Todd Tarbet <ttarbet@uswest.net> Layton, UT USA - Friday, May 11, 2001 at 23:44:32 (EDT) The best PLC's site i ever discovered! Please keep on the good works. The informations applied are truly fruitful for my University project.
Gan Wee Hooi <vhooi75@hotmail.com> Penang, Malaysia - Sunday, May 06, 2001 at 03:24:34 (EDT) i'm student and right now i have project and working with plc, but in my country some book tutorial for plc, it's very rare. And i don't have some much money to buy book from you and internet connecction in my country is very bad.
CV <rob242@mailsurf.com> dsdf, USA - Wednesday, May 02, 2001 at 08:49:14 (EDT) What a wonderful site! It's just what I'm looking for! I've been a PLC fan for many years, and I've been looking for a good place to exchange our experience for years. It's the best site for us, I beleive. Thanks the builder!
Arthur Wang <Arthur.W@mail.com> Toronto, On Canada - Friday, April 27, 2001 at 00:48:30 (EDT) Good site, I did the tutorial and understand it. The tricky bit is the LADSIM software, I just can't seem to get multiple input devices in as there should be, counters etc.
Robert Mee <robertm@expamet.co.uk> Hartlepool, UK - Thursday, April 26, 2001 at 05:56:32 (EDT) This site is very attractive.I am looking for internet plc jobs but there was not any menu for it.Also your site will be very useable if you have a section for industrial applictions of any kinds of plcs.I hope your site progress everyday.
ALIREZA KEBRIYAIE <a_kebriyaie@yahoo.com> KERMAN, IRAN - Wednesday, April 25, 2001 at 00:11:58 (EDT) Add your comments here
ALIREZA KEBRIYAIE USA - Tuesday, April 24, 2001 at 23:51:28 (EDT) This is an excellent site. It feels good to have a place to go to get help, and to be able to help others. Nice work.
James A. Miller <wildpen@mhtc.net> Barneveld, WI United States - Monday, April 23, 2001 at 04:05:38 (EDT) One and only site where i could get the information on PLC.
Latha Jessie <lathalatha@hotmail.com> Chennai, TN India - Saturday, April 21, 2001 at 16:33:10 (EDT) This is an excellent site!
C. Andre Jackson <cajackson@uswest.net> Coon Rapids, MN USA - Wednesday, April 18, 2001 at 16:51:12 (EDT) Is a very good page of plc and i want to see a few o exercises, no to dificult, and the other hand i want a little help whit simens code anywere of plc
Thank you
rodrigo carrillo <rodgrigo.carrillo@mailcity.com> zacatecas, zac mexico - Sunday, April 15, 2001 at 16:17:25 (EDT) cool site! great animations!
gives good understanding of plc basics with some very simple examples.
suggestions:
1. you may add information about other PLC programming languages like SFC, Function Blocks, structure text etc.
2. new advancements in PLC hardware/software
vipul <vipulabhavsar@yahoo.com> sarnia, on canada - Friday, April 13, 2001 at 22:04:56 (EDT) I am currently doing my industrial training in Infineon Tech...learning about PLC...thanks a lot for the tutorial...it helps a lot in my work....
Melissa <ghbmelissa@hotmail.com> Kajang, Selangor Malaysia - Thursday, April 12, 2001 at 10:26:54 (EDT) i'm student and right now i have project and working with plc, but in my country some book tutorial for plc, it's very rare. And i don't have some much money to buy book from you and internet connecction in my country is very bad. Somebody hel me pls.
dedy setyawan <dikes@usa.net> Sidoarjo, Jawa Timur Indonesia, indonesia - Thursday, April 12, 2001 at 02:01:26 (EDT) great site
seenu USA - Sunday, April 08, 2001 at 23:07:32 (EDT) blown site man!!!!
helped me big time with my b.e project..
cheers!!!
arjan <balleshera@clubber.co.uk> poona, maharashtra india - Sunday, April 08, 2001 at 11:27:41 (EDT) Hi,I,m electronic technician I work a lot with diferent type of PLC Like,AB,Siemems,plc direc,OMROM,GE.And I not saw the manual that explain in simple terms the operation of the PLC'S than your site.
Miguel Lopez <malopezt2@hotmail.com> Jayuya, Puerto Rico USA - Wednesday, April 04, 2001 at 21:51:32 (EDT) Add your comments here
Miguel Lopez <malopezt2@hotmail.com> Jayuya, Puerto Rico USA - Wednesday, April 04, 2001 at 21:37:15 (EDT) Thank you for putting up this site. It was very helpfull to me. This is GREAT.
You Da Man.
Ali <alicatman@onebox.com> Austin, TX USA - Monday, April 02, 2001 at 12:32:16 (EDT) well can any one help me if i require any further information if at all regarding plcs.
Ravi <cgewho@yahoo.com> mumbai, maharastra india - Monday, April 02, 2001 at 03:45:40 (EDT) I am inst engg n ,well u may not believe the information i got regarding plcs were un immaginable any buddy requiring any info can mail on me.
Ravi <cgewho@yahoo.com> mumbai, maharastra india - Monday, April 02, 2001 at 03:42:43 (EDT) I am a student of Instrumentation Engg. at Jadavpur University.In a very short time I learned lot more about PLC.Please add more examples.
Partha Prasun Maji <p_prasun@lycos.com> calcutta, W.b India - Sunday, April 01, 2001 at 00:55:17 (EST) Top quality site which is helping me with my college projects
David Louden <dalview.94@virgin.net> Dalgety Bay, Scotland - Friday, March 30, 2001 at 17:47:20 (EST) I have visited many sites over the internet and this one is by far the most comprehensive and informative site ever.Before I knew nothing about plcs and now I fully understand them. So I can start practicing my programming skills thank you!!
jay barrie, ont Canada - Friday, March 30, 2001 at 14:40:52 (EST) THank's for the lessons, send me the operational manual and software.
adi winasis <adi_win@email.com> batam, riau indonesia - Saturday, March 24, 2001 at 05:54:14 (EST) Great site.
The best of its kind
Dr. Tigrek <tigrek@hotpop.com> USA - Tuesday, March 20, 2001 at 16:29:47 (EST) This is a nice site I have seen ever before.
It was great that I am able to apply a PLC Programmer job through this site.Today I applied for that and hoping for my best.
Thanks a lot to this site.
Sugg:
Can this site help me to find some good employer on PLC jobs.
Asim K. Sinha <AsimKSinha@aol.com> Sharon, MA USA - Tuesday, March 20, 2001 at 09:15:37 (EST) Great site,I am still stuck on a project that I started , I am trying to build a down/up counter, On the count down, turn on LED's for the odd number,and on the up count turn off the the LED's on the even numbers .I have use all the info here on the site and I can only get the even LEDs to come on. HELP!!! SOME body
Mack <mack723@gateway.net> Belcamp, MD USA - Monday, March 19, 2001 at 19:11:42 (EST) it is very good side but plz from all frind of this side provide me alot of free side to help my student to hane many excample about plc applecations . thanks for all i'll wait u all on my e-mail
mam <mamoun-sh@excite.com> sy - Sunday, March 18, 2001 at 08:46:19 (EST) I am student at St.clair college. In a very short time I learned a lot form this site. Please add some more animated examples to the site.
Saeed-Ul-Haq <saeed.suh@usa.net> Windsor, On Canada - Tuesday, March 13, 2001 at 22:05:03 (EST) cool stuff you did. many congratulations and thanks from yours truly. i'll get yr book when i get the mooney dude.. keep it up.
frances firracova paris, france - Sunday, March 11, 2001 at 19:10:49 (EST) Sólo felicitarles por la excelente página que tienen, trae información importantísima para nuestra labor y para nuestra autocapacitación...Espero conseguir pronto el libro que ustedes promocionan.
Acosta Columbos Carlos Alberto <acosta_columbos@yahoo.com> Piura, Piura Perú - Saturday, March 10, 2001 at 10:02:25 (EST) I WANT TO LEARN ABOUT PLC.
BENITO VARGAS MENDEZ <fransanz@coqui.net> Ponce, Puerto Rico USA - Friday, March 09, 2001 at 21:41:11 (EST) really its a fantastic chance to starters of fresh candidate to learn abou this PLC.
shreyas <survivor_indian@yahoo.com> trichy, tn india - Friday, March 02, 2001 at 16:15:19 (EST) This Is a great site i wish i had found it sooner because there was a job opening at work and you needed to know plc.
Blair Comer <blaircomer@excite.com> Westivlle, NS Canada - Friday, March 02, 2001 at 13:29:32 (EST) Add your comments here
surenthran <sasikala31@hotmail.com> perak, perak malaysia - Friday, March 02, 2001 at 03:33:49 (EST) this is an excellent site.i am really very happy for having found such a great site on the net,same time highly thankful to the owners for creating a useful site like this and i wish all of them the very best of luck for their future achievements.
kumuda valli <kumudavalli@rediffmail.com> hyderabad, ap india - Tuesday, February 27, 2001 at 21:36:42 (EST) Congrats ! Great site !..stumbled upon it while searching for some K.M. / Honeywell IPC620 info...now let me search under "Jurassic PLC park"
Jeff Yan <jeffreyy@bestholdings.com> Johannesburg, South Africa - Tuesday, February 27, 2001 at 12:18:12 (EST) Thanks a million! I'm not as stupid as I thought I was. I would'nt have known what to do without your site. I'll support your GREAT site 100%
Mike D
Mike Downing <mikeis50@hotmail.com> Dayton, Oh USA - Sunday, February 25, 2001 at 21:53:56 (EST) Add your comments here
aravind <aravindj80@rediff.com> USA - Saturday, February 24, 2001 at 12:12:52 (EST) It's really great site
Galih Argadinata <galih@tf.itb.ac.id> Bandung, West Java Indonesia - Saturday, February 24, 2001 at 01:46:36 (EST) Add your comments here
hossein <honarmand_hossein@hotmail.com> isfahan, iran - Tuesday, February 20, 2001 at 02:26:24 (EST) I'm a 65 year old retired psych prof, who likes to take electronics courses. But my prof puts ladder logic diagrams on the board with no explanation.
So this site is invaluable to me! For example, no one has ever mentioned that each rung is executed in sequence.
You've done me a great service. I used to do this stuff with relays (hundreds) as a kid, and it was really fun.
Jerry O'Dell
Jerry W. O'Dell <jwodell@provide.net> Ypsilanti, MI USA - Friday, February 16, 2001 at 11:31:47 (EST) Bel sito, peccato che è tutto in inglese.
Visitate il forum siu PLC in lingua italiana: http://pub51.ezboard.com/bplc16109
grazie
ciao a tutti
plc65 <plc65@usa.net> Milano, Italy - Thursday, February 15, 2001 at 17:58:30 (EST) Im glad that this site now can help me a lot on my study about PLC..
Reze G. Arroyo Jr. <ezer_o_u@yahoo.com> tacloban, phillipines - Thursday, February 15, 2001 at 09:28:18 (EST) I was just surfing and stumbled across your site. I'm very glad I did! I find the Q&A section very interesting. I didn't hesitate in bookmarking the site and I look forward to using your site to help with some of those brain teasers. Hopefully I can offer some assitance as well.
Regards,
Rob Simpson
Electrical Project Engineer
Meritor Suspension Systems Co.
Chatham, Ontario
Rob Simpson <r.simpson@sympatico.ca> Chatham, ON Canada - Monday, February 12, 2001 at 23:31:24 (EST) Thank you for your excellent site
Dave Johnson <birddogdj@hotmail> Atascadero , Ca USA - Sunday, February 11, 2001 at 22:47:15 (EST) Add your comments here
Dave Johnson <birddogdj@hotmail> Atascadero , USA - Sunday, February 11, 2001 at 22:45:23 (EST) Well done! A nice introduction to the subject.
Des Coyle <descoyle@esatclear.ie> Ballina, Mayo Ireland - Saturday, February 10, 2001 at 16:01:45 (EST) This is a very constructive and helpfull site. thak you for for such valueble information.I am a maintanance mechanic but i don't have to much plc experiace.
Juan C Hernandez <jch55@worldnet.att.net> San Fernando, ca USA - Monday, February 05, 2001 at 23:58:34 (EST) An excellent site with good advice from many of its contributers.
Steven Burton <stevenburton@ntlworld.com> Puckeridge, England - Saturday, February 03, 2001 at 16:47:41 (EST) I am an Electrical Engineering Technology student enrolled at College of The North Atlantic in St. John's, NF and I am right now studying PLC's. I find this web-site very useful because our PLC course does not have a text book or reference material associated with the course. I find this site easy to use, and easy to follow. Many thanks!!!!!
Mark Kennedy <markjerome.kennedy@nf.sympatico.ca> Kilbride, NF CANADA - Monday, January 29, 2001 at 22:45:16 (EST) GREAT INFO!!! I wish I found your site long ago! Fun and easy to understand! Just hook up with some search engines so it's easier to find PLCs.net. I found it through a newsgroup suggestion. I can't wait for your book to arrive. THANKS PHIL! :) :)
AM <mrmiller8@yahoo.com> Houston, Tx USA - Wednesday, January 24, 2001 at 22:57:48 (EST) Greaat site one thing to consider links to sites that offer related shareware etc.
thunderbelly <shawnkilleleagh@sympatico.ca> Canada - Tuesday, January 23, 2001 at 16:36:39 (EST) i like your web site its really help for new internet users to find information..
Rehan <rehansali@aol.com> B, va USA - Tuesday, January 23, 2001 at 12:38:33 (EST) I'm not really in a bussines, and I'm only 14 years old, but I want to make a doorlock on the door of my room that I can control with my computer. It looks like I will find information here on how to do that. Great site!
Thanks!
David Verhasselt <snake-eyes@freegates.be> Knokke-Heist, WV Belgium - Monday, January 22, 2001 at 15:46:36 (EST) i hit upon this site from a "google" search. i am just making an entry into business of PLCs ... this site is a great one for starters!! the forum is great ... look forward to keep in touch with the PLC community!!
adios!
ranjeet vaishnav <ranjeet.vaishnav@in.abb.com> bangalore, karnataka INDIA - Wednesday, January 17, 2001 at 22:54:05 (EST) Great Site. It has really given a basic understanding on PLCS and its programming.
SHERI GEORGE <george.sheri@geind.ge.com> Bangalore, Karnataka India - Wednesday, January 17, 2001 at 16:15:35 (EST) This site is really very good to clear all basics & fundamentals about the concept of plc & automation field for begineers & professionals.
Raj kumar Verma <rajkumar_364@yahoo.com> Delhi, UP INDIA - Monday, January 15, 2001 at 09:44:22 (EST) Am very keen on this site. I am a College instructor, and I would be interested in any tutorial
software available on CD. As well, I would like to order your book, however there appears to be a hangup on your site. (I wish to pay by credit card; please let me know when you are able to process my order. Thanl You.
Grant Brummell <digger.1@sympatico.ca> Trenton, Ont. Canada - Saturday, January 13, 2001 at 21:06:55 (EST) I've been having to call in help to deal w/ any problems w/ a plc. Now I am looking foreward to dealing w/ them myself. After all, after dealing w/ FORTRAN and COBOL in college this whould be a walk in the park. Thanks!
Richard Hurd <hurdent@qwest.net> Colfax, IA USA - Saturday, January 13, 2001 at 20:31:02 (EST) Excelente sitio. Gracias.
Alina Gómez <alina@chab.minbas.cu> Habana, Cuba - Thursday, January 11, 2001 at 16:21:03 (EST) This is the greatest thing since the making of Cheerio's!!!
Ralph <bookwork@mich.com> Emmet, MI USA - Wednesday, January 10, 2001 at 13:40:03 (EST) I can't believe such a site exist. Imagine folks, The internet is actually useful for something. Great job, great site, Thank you for your dedication.
Looking foward to the book...
Robin McCrory <rpmccror@nwi.net> Moses Lake , WA USA - Wednesday, January 10, 2001 at 11:59:19 (EST) Thanks for an informative site!Real Quality.
Grayson Colford <akka85@hotmail.com> USA - Monday, January 08, 2001 at 21:16:21 (EST) As an industrial electricity service instructor teaching the old-fashioned electromechanical relay controls, I find your site the perfect transition from the old-fashioned systems to the plc way. My students will greatly appreciate how you have made the transition so easy.
richw <bassdad1@hotmail.com> oklahoma city, ok USA - Monday, January 08, 2001 at 19:15:03 (EST) I certainly enjoy the many discussions shown on Q&A section. I have tried several times to ask questions but somehow can't seem to get the question up on the board?
I go to the POST and enter the question but my question is never on the docket.
Will keep trying
Thanks
Richard <RTiller177@aol.com> Alvin, TX USA - Sunday, January 07, 2001 at 00:27:36 (EST) I loved your tutorial site it realy helped me out.I am just getting in to PLC and I hope that your book is as good as your web page thanks
Jerry <army880260@hotmail.com> walla walla , wa USA - Friday, January 05, 2001 at 23:49:02 (EST) Simply a very good site, surely useful for everyone who want to know about PLCs
Quoc Khanh, Nguyen <quoc@ossnet.uni-oldenburg.de> Oldenburg, Germany - Wednesday, January 03, 2001 at 10:36:40 (EST) Home Contents |
|
copyright © 1996,
1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 by Phil Melore.
All rights reserved. |